Specifications

29
2‐4‐4Using“PPTPxDSL”asbroadbandconnectiontype

1. Select“PPTPxDSL”ifyourISPisprovidingyouInternetaccessviaPPTP
(Point‐to‐PointTunnelingProtocol).



2. IfyourISPisprovidingyoudynamicIPaddresses,select“ObtainanIPaddress
automatically”(referto2‐4‐1forsetupdetails).IfyourISPisprovidingyouastatic
IPaddress,select“Usethefollowing IPaddress”(referto2‐4‐2forsetupdetails).



NOTE:ThesesettingsmustbeconfiguredaccordingtoyourInternetservice.Please
contactyourInternetserviceproviderifyouarenotsurewhat toselect.

3. Configurethe“PPTPSettings”section.




