Specifications

28
2‐4‐3Using“PPPoExDSL”asbroadbandconnectiontype

1. IfyourISPisprovidingyouInternetaccessviaPPPoE(Point‐to‐PointProtocolover
Ethernet),select“PPPoExDSL”.



ItemName Description
UserName InputtheusernameassignedbyyourISPhere.
Password InputthepasswordassignedbyyourISPhere.
ServiceName GivethisInternetserviceaname(optional).
MTU InputtheMTUvalueofyournetworkconnectionhere.Ifyou
donotknow,usethedefaultvalue.
ConnectionType Pleasespecifyaconnectiontypehere.Thereare3options:

1. “Continuous”keepstheInternetconnectionaliveallthe
time.
2. “ConnectonDemand”onlyconnectstotheInternetwhen
youinitiateInternetconnection.
3. “Manual”connectstotheInternetonlywhenthe
“Connect”buttononthispageis
clicked,anddisconnects
whenthe“Disconnect”buttonisclicked.
IdleTimeOut Specifytheamountoftimetherouterwaitsbeforeshutting
downanidleconnection.Thisoptionisonlyavailablewhen
“ConnectonDemand”isselected.

2. Click“OK”tocompletesetup.

3. Whenthefollowingmessageappears,click“Apply”tosavethechangesandrestart
thebroadbandrouter.Therouterwilltakeabout30secondstorestart.

