Quick Installation Guide

5
Browser Based Configuration Interface
After setup you can access the browser based configuration interface to
configure or change the settings of the BR-6428nS V4. Enter
http://edimax.setup into the URL bar of a web browser on a network device
which is connected to the BR-6428nS V4.
If you can not access edimax.setup, connect the BR-6428nS V4 to
a computer using an Ethernet cable and try again.
The default username is “admin” and the default password is “1234”.
Use the menu down the left side to navigate. For more information, refer to
the user manual.