BR-6428nS V4 Quick Installation Guide 06-2016 / v1.
Package Contents Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): BR-6428nS V4 CD-ROM Ethernet Cable Quick Installation Guide 1 Power Adapter
Installation 1. Plug the included power adapter into the device’s 5V DC power port and the other end into an electrical socket. 2. Ensure that the power LED is lit. If not, the device is not properly connected. 3. Use a Wi-Fi device (e.g. computer, tablet, smartphone) to search for a Wi-Fi network with the SSID “edimax.setup” and connect to it. iOS 4 or Android 4 and above are required for setup on a smartphone or tablet. 4.
If you cannot access http://edimax.setup, please make sure your computer is set to use a dynamic IP address. This is a simple procedure and step-by-step instructions can be found in the user manual. 5. Choose if you want to use your BR-6428nS V4 in its default Wi-Fi router mode or in a different mode.
The BR-6428nS’s five available modes are outlined below: Wi-Fi Router Mode Access Point Mode Range Extender Mode Wireless Bridge Mode WISP Mode The device connects to your modem and provides 2.4GHz Internet (wireless and Ethernet) access for your network devices. The device connects to an existing router via Ethernet cable and provides 2.4GHz Internet (wireless and Ethernet) access for your network devices. The device connects wirelessly to your existing 2.
Browser Based Configuration Interface After setup you can access the browser based configuration interface to configure or change the settings of the BR-6428nS V4. Enter http://edimax.setup into the URL bar of a web browser on a network device which is connected to the BR-6428nS V4. If you can not access edimax.setup, connect the BR-6428nS V4 to a computer using an Ethernet cable and try again. The default username is “admin” and the default password is “1234”.
Troubleshooting 1. In range extender mode, how do I connect to a network which has a hidden SSID? a. During iQ Setup select “Setup extender manually” as shown below. Manually enter the SSID of the hidden network, an SSID for your device and the encryption information for the hidden network. SSID Device SSID Encryption Enter the SSID (network name) of your existing, hidden network.
d. Connect your computer directly to your modem and check if you can access the internet. If you can’t, please contact your Internet service provider for assistance. 3. I can’t open the web based configuration interface. a. Please ensure your computer is set to use a dynamic IP address. Refer to the user manual for guidance if you are unsure how to do this. 4. How do I reset my device to factory default settings? a.
PIN CODE This is your device’s PIN code for Wi-Fi Protected Setup (WPS). 5. I forgot my password. a. Reset the router to its factory default settings and use the default username admin and default password 1234. Default settings are displayed on the product label on the back of the device, as shown above. 6. My BR-6428nS V4 has a weak wireless signal in range extender mode. a. Weak signals are usually caused by interference from other devices or obstacles blocking the BR-6428nS V4’s wireless signal: b.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2009/125/EC. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 1999/5/CE, 2009/125/CE Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 1999/5/ES, 2009/125/ES.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: 5-in-1 N300 Wi-Fi Router, Access Point & Range Extender Model No.: BR-6428nS V4 The following European standards for essential requirements have been followed: AN/NZS CISPR 22: 2009+A1:2010 EN 300 328 V1.8.1 (2012-06) EN 301 489-1 V1.9.2 (2011-09) EN 301 489-17 V2.2.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
