User manual

68
III-3-5-2. Guest/ Multiple SSID
You can setup an additional “Guest” Wi-Fi network so guest users can enjoy
Wi-Fi connectivity without accessing your primary network. The “Guest”
screen displays settings for your guest Wi-Fi network.
The guest network is separate from your primary network. The
settings for your primary network can be found in the “Basic”
menu.
In access point mode, the “Guest” feature in the menu is replaced
by “Multiple SSID”. The BR-6428nS V3/BR-6228nS V3 supports up
to four additional SSIDs for each wireless band in access point
mode.
802.1x authentication is unavailable in WISP mode for the
wireless band that is used to connect to WISP’s AP.
Enable Guest SSID
Check/uncheck the box to enable/disable the
guest Wi-Fi network.
Wireless Guest
Name
Enter a reference/ID name for your guest
wireless network.
Enable Wireless
Clients Isolation
Check the box to enable wireless clients
isolation. This prevents wireless clients
connected to the BR-6428nS V3/BR-6228nS V3
from communicating with each other and
improves security. Typically, this function is
useful for corporate environments or public
hot spots and can prevent brute force attacks
on clients’ usernames and passwords.