User manual

58
Start IP
Enter the start IP address for the DHCP
server’s IP address leases.
End IP
Enter the end IP address for the DHCP
server’s IP address leases.
Your device’s DHCP server can be configured to assign static (fixed) IP addresses to
specified network devices, identified by their unique MAC address.
Enable Static DHCP
Leases
Enable/disable static DHCP leases. This must
be enabled in order to assign any network
device a static IP address.
MAC Address
Enter the specified network device’s MAC
address here.
IP Address
Assign a fixed IP address for the specified
network device here.
Add
Add the information to the “Static DHCP
Leases Table”.
Clear
Clear the MAC address and IP address fields.
Delete Selected /
Delete All
Delete selected or all entries from the table.
The LAN IP page will be displayed as below when your device is
set to access point mode. You can set theBR-6428nS
V3/BR-6228nS V3 to obtain an IP address automatically or you
can specify an IP address.