Operation Manual

12
II‐2. AccessPointMode

1.  ConnecttheyellowLANportofyourBR‐6428nSV2/nCtotheLANportof
yourexistingrouterusinganEthernetcable,thenclick“Next”.



2.  Select“ObtainanIPaddressautomatically”or“UsethefollowingIP
address”foryourBR‐6428nSV2/nC.IfyouareusingastaticIP,entertheIP
address,subnetmaskanddefaultgateway.Click“Next”toproceedtothe
nextstep.


