Operation Manual

7


4. PleasecheckalltheLEDsonthefrontpanel.The“PWR”and“WAN”LEDsshouldbe
on.The“LAN”LEDshouldbeonifthecomputerisconnectedandcorrectly
powered.Ifyouencounteranyproblems,pleasemakesurethatallyourdevices
areconnectedandpoweredcorrectly.

2‐2SettingClientComputerstoObtainIPAddressesAutomatically

Beforeyoustartconfigurationprocedures,yourcomputermustbeabletogetanIPaddress
automatically(setto usedynamicIPaddresses).IfyourcomputerissettouseastaticIP
address,orifyouareunsure,pleasefollowthe
followinginstructionstoconfigureyour
computertousedynamicIPaddresses:

z Windows95/98/Me (seesection2‐2‐1)
z Windows2000  (seesection2‐2‐2)
z WindowsXP(seesection2‐2‐3)
z WindowsVista  (seesection2‐2‐4)

2‐2‐1Windows95/98/MeIPAddress
Setup

1. Clickthe“Start”button(itshouldbelocatedatthelower‐leftcornerofyour
screen),thenclick“ControlPanel”.Double‐clickthe“Network”icon,andthe
“Network”windowwillappear.Select“TCP/IP”,andthenclick“Properties”.
