Operation Manual

30
ItemName Description
UserID Inputtheusername assignedbyyourISPhere.
Password InputthepasswordassignedbyyourISPhere.
PPTPGateway InputthePPTPgatewayassignedbyyourISPhere.
ConnectionID Givethisconnectionaname(optional).
MTU InputtheMTUvalueofyournetworkconnectionhere.Ifyou
donotknow,usethedefaultvalue.
BEZEQ‐ISRAEL Checkthe“Enable”boxifyouareinIsraelandusingBEZEQ
networkservices.
ConnectionType Pleasespecifyaconnectiontypehere.Thereare3options:

1. “Continuous”keepstheInternetconnectionaliveallthe
time.
2. “ConnectonDemand”onlyconnectstotheInternetwhen
youinitiateInternetconnection.
3. “Manual”connectstotheInternetonlywhenthe
“Connect”buttononthispageis
clicked,anddisconnects
whenthe“Disconnect”buttonisclicked.
IdleTimeOut Specifytheamountoftimetherouterwaitsbeforeshutting
downanidleconnection.Thisoptionisonlyavailablewhen
“ConnectonDemand”isselected.

Click“Apply”tosavethechanges. Afteryouhaveclicked“Apply”,youwillseethefollowing
message:



Click“Apply”tosavethechangesandrestartthebroadbandrouter.Ittakesabout60
secondsforthebroadbandroutertorestart.Click“Continue”toconfigureothersettings.

3‐2‐5L2TP

Select“L2TP”ifyourISPisprovidingyouInternetaccessviaL2TP(Layer‐2Tunneling
Protocol).

Ifyour
ISPisprovidingyoudynamicIPaddresses,select“ObtainanIPaddress
automatically”.IfyourISPisprovidingyouastaticIPaddress,select“UsethefollowingIP
address”.