BR-6288ACL Quick Installation Guide 09-2014 / v1.
Package Contents Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): BR-6288ACL CD-ROM RJ-45 Splitter Cable Quick Installation Guide Power Adapter USB Cable 1
Installation 1. Plug in the BR-6288ACL using the included power adapter and/or USB cable. The BR-6288ACL requires 1 A of current – please ensure that your USB port can provide sufficient power. If not, use the 5V DC adapter. 2. Wait until the circular LED at the base of the product is flashing "Orange/Red". 3. Use a Wi-Fi device (e.g. computer, tablet, smartphone) to search for a Wi-Fi network with the SSID “edimax.setup” and connect to it.
. Open a web browser and if you do not automatically arrive at the “Get Started” screen shown below, enter the URL http://edimax.setup and click “Get Started” to begin. If you cannot access http://edimax.setup, please make sure your Wi-Fi device is set to use a dynamic IP address. This is a simple procedure and step-by-step instructions to do this on a computer can be found in the user manual. 5. Choose if you want to use your BR-6288ACL in its default Wi-Fi router mode or in a different mode.
The BR-6288ACL’s five available modes are outlined below: Wi-Fi Router Mode The device connects to your modem and provides 2.4GHz and/or 5GHz Internet (wireless and Ethernet) access for your network devices. Access Point Mode The device connects to an existing router via Ethernet cable and provides 2.4GHz and/or 5GHz Internet (wireless and Ethernet) access for your network devices. Range Extender The device connects wirelessly to your existing Mode 2.
RJ-45 Splitter cable The BR-6288ACL includes an RJ-45 splitter cable in the package contents. This plugs into the “Network” port of the BR-6288ACL and splits the port into two separate Ethernet ports – providing two ports instead of one, as shown below. In Wi-Fi router mode, one port is the WAN (Network) port. The WAN port connects directly to your modem. In Wi-Fi router mode, the other port is the LAN port. The LAN port is for wired connections to other network devices (e.g. computer).
Wi-Fi Power Switch After setup you can use the Wi-Fi power switch to adjust the strength of the BR-6288ACL’s wireless radio if you wish. Normal mode uses full 100% wireless power while green mode uses 25% wireless power. Browser Based Configuration Interface After setup you can access the browser based configuration interface to configure or change the settings of the BR-6288ACL. Enter http://edimax.setup into the URL bar of a web browser on a network device which is connected to the BR-6288ACL.
LED Status LED Color Orange/Red LED Status Description On Product is starting up. Flashing (Slow) No Internet connection. Resetting to factory default status or Wi-Fi Flashing (Fast) Protected Setup (WPS) is active. Light Green On Dark Green On Off Off Internet is connected and Wi-Fi is full power. Internet is connected and Wi-Fi is in green mode (25% power). BR-6288ACL is off.
Troubleshooting 1. I can’t access the Internet on my computer/smartphone/tablet. a. Ensure that all cables are connected properly. Try a different Ethernet cable. b. Check if you can access the web based configuration interface. If not, please ensure your Wi-Fi device is set to use a dynamic IP address. If you are unsure how to do this, try using a computer and refer to the user manual for guidance. c.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: Français: Čeština: Polski: Română: Русский: Magyar: Türkçe: Українська: Slovenčina: Deutsch: Español: Italiano: Nederlands: Português: Norsk: Svenska: Dansk: Suomi: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2009/125/EC. Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 1999/5/CE, 2009/125/CE.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: AC600 Multi-Function Concurrent Dual-Band Wi-Fi Router Model No.: BR-6288ACL The following European standards for essential requirements have been followed: Directives 1999/5/EC Spectrum : EMC : Safety (LVD) : ETSI EN 300 328 V1.8.1 (2012-06); ETSI EN 301 893 V1.7.1 (2012-06) EN 301 489-1 V1.9.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
15