Quick Installation Guide

6
Browser Based Configuration Interface
After setup you can access the browser based configuration interface to
configure or change the settings of the BR-6208AC V2. To access the browser
based configuration interface, enter http://edimax.setup into the URL bar of
a web browser on a network device which is connected to the BR-6208AC V2.
If you can not access edimax.setup, connect the BR-6208AC V2 to
a computer using an Ethernet cable and try again.
You will be prompted for a username and password. The default username is
“admin” and the default password is “1234”.
You will arrive at the “Status” screen as shown below. Use the menu down the
left side to navigate. For more information, refer to the user manual.