Quick Installation Guide

9
LED
Color
LED Status
Description
Power
Green
On
BR-6208AC V2 is on.
Off
BR-6208AC V2 is off.
Internet
Green
On
Internet connection is ready.
Flashing
Factory default state, or Ethernet
cable not connected, or no
Internet connection.
2.4GHz Wi-Fi
Green
On
2.4GHz Wi-Fi wireless activity
(transferring/receiving data).
Flashing
2.4GHz WPS is active.
Off
2.4GHz Wi-Fi not active.
5GHz Wi-Fi
Green
On
5GHz Wi-Fi wireless activity
(transferring/receiving data).
Flashing
5GHz WPS is active.
Off
5GHz Wi-Fi not active.
Firmware
Green
On
Firmware is latest.
Flashing
Firmware is upgrading.
VPN
Green
On
VPN is on.
Off
VPN is off.
5. I can’t access the Internet.
a. Ensure that all cables are connected properly. Try a different Ethernet cable.
b. Check if you can access the web based configuration interface. If not, please
ensure your Wi-Fi device is set to use a dynamic IP address. If you are unsure
how to do this, try using a computer and refer to the user manual for guidance.
c. Login to the web based configuration interface and go to Internet > WAN Setup
and check that the connection type is correct. If you are unsure which internet
connection type you have, please contact your Internet Service Provider (ISP).
d. Connect a computer directly to your modem and check if you can access the
internet. If you can’t, please contact your Internet service provider for
assistance.