Operation Manual

154
Firmware upgrade failures can happen occasionally due to power cuts or
unstable connections. In this scenario, you need to first connect a computer to
one of your BR-6208AC V2’s LAN ports using an Ethernet cable. Then you need
to modify your computer’s IP address to 192.168.2.x where x is any value
between 3 and 254. Refer to IV-1-2. How to modify the IP address of your
computer if you need guidance to do so.
From there, you need to go to 192.168.2.1 in a web browser, and you will see
the page below:
Click “Browse” to locate the firmware file on your computer and then click
“Upload” to upload the new firmware. It may take several minutes to complete,
please wait and follow the instructions on screen.