Quick Installation Guide

19
3-4 Wireless Setup (For Wireless Router Only)
SSID is the name of the wireless router. You may change your SSID to a meaningful
name so that you can identify your wireless router from others. You can use any
alphanumeric characters, up to 32 characters. By default the ESSID is ‘default’.
It’s very important to set wireless security settings properly! If you don’t,
hackers and malicious users can reach your network and valuable data without your
consent and this will cause serious security problem.
To secure your wireless network, please click “Interface Setup”, then click “Wireless”,
and follow the following instructions to configure the wireless security settings:
It’s recommended to use WPA to protect your wireless router from hackers. Select
Enabled WPA-PSK and enter the Pre-Share Key below.
Use 8-32 alphanumeric characters. Please remember this key, you need this key to
connect to your wireless router wirelessly.