AR‐7167WnA AR‐7167WnB Quick Installation Guide 04‐2012/ v1.
COPYRIGHT Copyright © Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
PRODUCT INTRODUCTION Thank you for purchasing an Edimax product. This router is a high speed wireless 11N ADSL2/2+ modem router. You can surf the Internet and share the connection through the Edimax router without investing in other devices. You can configure the router by running the Setup Wizard in the CD‐ROM provided in the package. The wizard provides quick setup for the Internet connection, SSID, wireless security, firmware upgrade and changing router’s password.
1. Minimum Requirements The following devices are required to configure the ADSL2+ Router: z A PC with an Ethernet Adapter and a Web‐Browser (Internet Explorer 4.0 or higher) z ADSL Line z RJ‐45 Ethernet cable and RJ‐11 Phone Line 2.
3) WPS Press the WPS button 5 seconds to activate the wireless protection. 4) Power Jack Please plug‐in the supplied power adapter to the ADSL Router’s power jack. The power adapter is 12V. 5) Local Area Network (LAN) The router’s 4 LAN ports are where you connect your LAN’s PCs, printer servers, hubs and switches etc. 6) ADSL Connect the supplied RJ‐11 telephone cable to this port and connect it to your ADSL/telephone socket.
3. Install ADSL Router Step 1. Connect the ADSL Line Use the supplied RJ‐11 telephone cable, connect the router from the ADSL port to your telephone socket with an ADSL micro filter plugged in. Step 2. Connect the router to your LAN network Connect the router to your PC, hub or switch by attached the Ethernet cable to the LAN port of the router. Step 3. Connect the Power Adapter to the Router Connect the power adapter to the power jack on the rear panel of the router and switch on the power. Step 4.
Step 6. PC LAN IP Configuration Configure the PC LAN setting to automatically obtain an IP address from the router by following the below steps. z Click “Start” in the task bar then select the “Control Panel”. z Click “Switch to Classic View” on the left top to see more setting icons. z Find an icon “Network Connection” then Double‐Click to open the network connection setting.
z z z You will see an icon “Local Area Connection”, select the icon then Right‐Click the mouse to open the sub‐menu and select the “Properties”. Select the “Internet Protocol (TCP/IP)” then click the “Properties”. Ensure the parameter marked in blue are checked in “Obtain an IP address automatically” and “Obtain DNS server address automatically” then press “OK” to close.
4. Internet Connection If you lost your CD‐ROM, you can configure this ADSL modem router via the following procedures. The procedures will guide you to login to your modem router using the Internet Explorer, so that you can set up the Internet connection and configure all others function. 1. Enter the router’s default IP address: “192.168.2.1” into your PC’s web browser and press “enter”. 2. The login screen below will appear. Enter the “User Name” and “Password” and click “OK” to login.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2009/125/EC. French: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 1999/5/CE, 2009/125/CE Czechian: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 1999/5/ES, 2009/125/ES.
Declaration of Conformity We, Edimax Technology Co., LTD., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Council directive (2006/95/EC). Equipment : Model No. : N150 Wireless ADSL Modem Router AR-7167WnA & AR-7167WnB The following European standards for essential requirements have been followed: Spectrum : EMC : ETSI EN 300 328 : V1.7.1(2006-10) EN 301 489-1 V1.8.1(2008-04) EN 301 489-17 V2.1.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine‐readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
15
