Quick Start Guide

z If problems persisted or you forgot your router’s password, press the reset
button for 20 seconds with power on. The router will reset to the factory
default settings. (Warning: all your current settings will be lost and replaced
by the factory default settings)
3) Power Jack
Please plug-in the supplied power adapter to the ADSL Router’s power jack. The
power adapter is 12VDC,
4) Local Area Network (LAN)
The router’s 4 LAN ports are where you connect your LAN’s PCs, printer servers,
hubs and switches etc.
5) ADSL
Connect the supplied RJ-11 telephone cable to this port and connect it to your
ADSL/telephone socket .
Front LEDs
On the router’s front panel, there are LED lights showing the router’s current status.
Below are the description and explanation of each LED.
WLAN ：For wireless model only
LED
Light
Status
Description
PWR
(Green) On The router is ready
Off Wireless LAN is disabled
Blinking Wireless network traffic is transmitting
WLAN
(Orange)
On Connected to an ADSL broadband connection successfully ADSL
(Green)
Blinking No ADSL broadband connection
On The LAN cable is connected to the router LAN
(Port 1-4)
Blinking Network traffic is transmitting through the LAN port