Installation guide

4. ISP Settings
This router provides a setup tool to configure the ADSL settings. To ensure
the setup process is straight forward as promised, we introduce you to our
setup tool. The wizard has a built in database of the ADSL settings so that the
user can easily configure the router’s ADSL settings by only selecting the ISP
vendor in the wizard.
If you cannot find your ISP information in the wizard, please manually set the
ISP information through the wizard .
5. Setup Wizard
Before you start, please check the following items:
(A)Please make sure that you have connected the ADSL cable to the
router correctly. When the ADSL cable is worked normally, the ADSL
LED will be on.
(B)Uninstall all of dial up programs if you have installed previously for the
USB modem or other dial up devices.
(C)It is recommended to configure the router through the Ethernet cable
before you have set the wireless functions correctly
This wizard can be run in Windows 98SE/Me/2000/XP. The following
procedures are operated in Windows XP. (Procedures are similar for
Windows 98SE/Me/2000.)
Start：
Insert the CD shipped along with the ADSL router into your CD-ROM drive.
The Autorun.exe program should be executed automatically. If not, run
Autorun.exe manually from “Autorun” folder in the CD. You can click the
Setup Wizard to configure WAN connection or click QIG , Manual to study . If
your PC do not install Adobe Reader , you should click “Adobe Reader ” icon
to install .