RE-7478MK1 Quick Installation Guide 09-2019 / v1.
Contents I. II. Product Information .................................. 4 I-1. Package Content..................................................................... 5 I-2. System Requirements............................................................. 5 I-3. Hardware Interface ................................................................ 6 I-4. LED Status............................................................................... 7 Installation ................................................
III-7. Signal Status ....................................................................... 21 III-8. Logout ................................................................................ 22 IV. System .....................................................22 IV-1. Firmware Update ............................................................... 24 IV-2. LED Eco Mode .................................................................... 25 IV-3. Nickname & Login Password ..............................
I. Product Information The convenient package RE-7478MK1 of three nodes (1 Master, 2 Slave) effortlessly create a reliable internet connection and extend your internet access throughout your home or office. With the EdiMESH App, you can set up your devices in minutes, and manage each device from anywhere. You can find all supporting documents from the link below or via QR Code: https://www.edimax.com/download (Once you’ve visited the Edimax official website, please enter the model no.
I-1. Package Content 3 x Nodes(12Vdc,1A) Quick Installation Guide Ethernet Cable (1 Master, 2 Slaves) Power Adapter (12Vdc,1A) I-2. System Requirements - Cable or xDSL Internet connection (RJ-45 cable modem or RJ-45 ADSL modem). - iOS 9.0 and above or Android 4.x and above for EdiMESH App.
I-3. Hardware Interface No.
I-4. LED Status LED Color Power Green Pair (Master) Green Pair (Slave) Green WPS Green WLAN Green LAN1 Green LAN2 Green Status On Description Power on. Off Power off. On Slave signal detected. Off No Slave signal detected. Excellent slave location. On Signal strength: 80 – 100% Good slave location. Slow Flashing Signal strength: 40 – 80% Poor slave location. Quick Flashing Signal strength: Below 40% Off No master signal detected.
II. Installation This section will guide you through the steps to connect your RE-7478MK1 to the EdiMESH App. II-1. Hardware Installation Please follow the steps below: 1. Connect a power supply to each node. 2. Connect the master to the router using Ethernet cables. One of the nodes has a Master sticker while the other two have Slave stickers, indicating their relationships. NOTE: Make sure the Ethernet cable is connected to the “LAN1” port of the Master node as shown below: 3.
II-2. Smart App Installation Search and download "EdiMESH" in Apple App Store or Google Play Store. Launch the "EdiMESH" in your smart mobile device. For Internet connection procedure, please follow the instructions below according to your mobile device.
II-3. Connect to RE-7478MK1 Please connect RE-7478MK1 with your smart phone. 1. Wi-Fi Connection Connect your device through mobile to the Wi-Fi SSID of your RE-7478MK1 (EDIMAX_**). Please find the unique SSID of your RE-7478MK1 on the product label. The last 2 digits ** of the SSID “EDIMAX_** "is the Mac last two digits of the Master’s label and Password: 12345678.
II-4. App Setup Please follow the steps below, 1. Download and install “EdiMESH” app via Google Play or Apple App Store. 2. Open EdiMESH. 3. Click “Choose Mesh System”.
4. Create a nickname for your Mesh System and click “Next”. 5. Enter the login password (for default login password “12345678”, see the label of the product) and click “Next”.
Once you register your nickname and login password successfully, a welcome page is displayed. Congrats! You can now remotely control RE-7478MK1 using the EdiMESH App. II-5.
Please note that the products are already paired. If the node does not connect to EdiMESH App successfully, or if you are trying to add a new node to EdiMESH, you can simply use the EdiMESH App or WPS button. Please follow the steps below if you want to add an additional node, 1. Click the “+” icon of "My Wi-Fi System" at the bottom of the home page. 2. Click “START” to search for the new node. 3. Click Next (Please check if the serial number of the node is correct). 4. Click Finish. II-6.
Please note that the 3 X nodes (Master/Slave) are already paired. If the slave node is failing to connect to the master node then you can use the WPS button to connect the Master/Slave node. Please follow the steps below, 1. Press the WPS button on the slave nodes and the master node. Note: If the Slave is added and paired successfully, the Pairing LED of the Slave will flash. III.
Please click the Menu icon on the top left corner of the Home Page and follow the instructions below for more details: III-1.
Going back to the homepage. III-2. Internet You can check the current connected internet information, Use the bridge mode if you are trying to use the device by connecting to an existing router or modem. If set up as a bridge mode, the same network as the connected router or modem is used. III-3.
You can change the SSID name and password, change Security Type, enable/disable Hide SSID, enable/disable Guest Network. III-4.
You can enable QoS operation to achieve maximum bandwidth. QoS also involves controlling and managing network resources. III-5.
When you turn on Parental Control, you can set schedule and restrict what websites can be accessed. III-6.
Features such as DMZ, UPnP and IPv6 are supported. We recommend that you use the default settings. III-7.
You can check how many devices are connecting to your RE-7478MK1. III-8. Logout You can log off the account by clicking “logout”. IV.
Please click the System icon on the top right corner of homepage.
IV-1. Firmware Update Please click “UPDATE” if the latest firmware is available.
IV-2. LED Eco Mode If the “LED Eco Mode” is enabled, all LEDs except the power LED will be turned off. IV-3. Nickname & Login Password You can change the nickname and login password in this section.
IV-4. Date & Time You can set up the date and time in the EdiMESH. Note: Not all countries have the DST, so you need to set the DST according to your local time.
IV-5. Languages You can change the language in the EdiMESH App. It supports English, Traditional Chinese, Simplified Chinese, Deutsch, Français, Nederlands, Italiano, Español, Português, dansk, Norsk, Svenska, Polski, Română, Čeština, Українська and Русский.
IV-6. Factory Reset If you experience problems with your RE-7478MK1, you can reset the devices back to their factory settings. Note: A factory reset erases all your data from your RE-7478MK1. Hardware Reset 1. Press and hold the reset button on the RE-7478MK1 for at least 10 seconds then release the button. 2. Wait for the Mesh to restart.
Software Reset 1. Click “FACTORY RESET” button. NOTE: Please wait for the RE-7478MK1 to restart. It will take a few minutes to completely erase your data and finish the setting. The RE-7478MK1 is ready for setup when the PWR is Green.
IV-7. About You can find the information of App Version, Privacy Policy and Terms and Conditions in this section.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment Directive. Equipment: AC1200 Wireless LAN Dual-Band Concurrent Repeater Model No.: RE-7478MK1 The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum : EN 300 328 V2.1.1 (2016-11) EN 301 893 V2.1.1 (2017-05) EMC : EN 301 489-1 V2.2.
