User manual

o Check Use Windows User Name to use the Windows user name as the LEAP
user name.
o OR: Check Manually Prompt for LEAP User Name and Password to manually
login and start the LEAP authentication process.
Select to Use Saved User Name and Password by choosing the radio button:
o Specify the LEAP user name, password, and domain to save and use.
3. Enter the user name and password.
4. Confirm the password.
5. Specify a domain name:
o Check the Include Windows Logon Domain with User Name setting to pass
the Windows login domain and user name to the RADIUS server. (default)
o OR: Enter a specific domain name.
6. If desired, check No Network Connection Unless User Is Logged In to force the
wireless adapter to disassociate after logging off.
7. Enter the LEAP authentication timeout time (between 30 and 500 seconds) to specify
how long LEAP should wait before declaring authentication failed, and sending an
error message. The default is 90 seconds.
8. Cli ck OK.
9. Enable the profile.
3.4.2 Using WPA Passphrase Security
To use WPA Passphrase security In the Atheros Client Utility, access the Security tab in the
Profile Management window.
1. In the ACU, edit the security settings by clicking New or Modify on the Profile Management
tab.
2. Choose a profile to edit, or name the new profile in the Profile Management window. Enter
the SSID of the access point the client computer connects to.
3. On the Security tab, choose WPA Passphrase.
4. Click on the Security tab, and choose the WPA-PSK radio button. Click the
Configure button.
.
22