User manual

52

configurationasafileandsaveitonyour
computer’sharddrive.
RestoreConfig Click‘Browse’ buttontoselecta
previously‐savedconfigurationfileonyour
computer’sharddrive,andthenclick
‘Apply’touploadtheconfigurationfile.
RebootNow ClickthisbuttontorebootIPcamera.This
functionisusefulwhenyouthinkIP
cameraisnotworkingproperly.
Resettodefault ResettheIPcamera’ssettingbackto
defaultvalue.Thereare2options:

1) KeepNetworkSetting:Resetallsettings
backtodefaultvalue,exceptnetwork
settings.YoucanstillusethesameIP
addresstoconnecttotheIPcamera.

2) FactoryDefault:Resetallsettings,

includenetworksettings.Please
reconnecttoIPcamerabyitsdefaultIP
address:192.168.2.3

Click‘Apply’toreset.Youcanpressand
hold‘WPS/Reset’buttonformorethan
10secondstoresetIPcamera’ssettingto
defaultvalue.










