User manual

46


Pleasedon’tchangethisvalueuntil
instructedbyFTPserver’sadministrator.
Path Inputthepath(folder)youwishtosave
snapshotfileonFTPserver.Ifyoudon’t
wanttospecifyfolder,youcanleavethis
fieldblank,andsnapshotfileswillbesaved
inthedefaultfolderwhenloggedontoFTP
server.
Passivemode Defaultsettingis‘Enable’ (usepassive
mode).IftheFTPserveryou’regoingto
usedoesnotsupportpassivemode(using
activemode),select‘Disable’here.

Click‘Apply’buttontosavechangesyoumade.Youcanalsoclick‘Sendatest
file’buttontouploadatestfiletoFTPserver,andamessageboxwillappearto
indicateiftheFTPuploadissuccessful,soyoucanexamineiftheparameters
yousetinthis
pagearecorrect.

5.1.3SMTP

YoucansendasnapshotpicturebyE‐MailwhenmotiondetectedbythisIP
camera.
