IC-3015Wn User Manual 10-2011 / v1.
Copyright Copyright © Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Contents Copyright ........................................................................................................................................................................... 1 Contents ............................................................................................................................................................................ 2 Chapter I: Introduction ...............................................................................................................
6.2 “Advanced” Settings ............................................................................................................................................. 51 Chapter VII: System Status .............................................................................................................................................. 53 7.1 System Information...............................................................................................................................................
Chapter I: Introduction 1.1 Highlights of your new Network IP Camera Congratulates on purchasing this tiny network IP Camera! Its tiny size maximizes portability and eases installation; you can easily install the camera in most places where you need video surveillance. If there’s no Ethernet cable available at the place you wish to install this IP camera, you can use built‐in wireless network to connect to your network, and saves the cost of cabling.
z IP Camera will become hot after long time of use. Refrain from touch IP Camera with hand, or cover this IP camera with paper or cloth. z If the IP Camera falls into water when powered, do not attempt to retrieve it back by yourself! Find a qualified electric technician for help. 1.3 Package Contents Please check the contents of your new Network IP Camera when you unpack the package. If any item is missing, please contact your dealer of purchase for help.
Familiar with your new Network IP Camera [Front] Antenna Lens Power / WPS LED LAN/WiFi LED Item 1 ‐ Lens 2 ‐ POWER LED Description IP Camera’s lens. Please keep the lens clean and do not touch by finger. POWER LED will light when the IP camera is powered on, and will flash when resetting IP camera’s settings.
[Back] Tripod Connector LAN port WPS / Reset Item 1 ‐ Tripod connector 2 ‐ LAN 3 ‐ 5VDC 4 ‐ WPS / RESET POWER Description This mounting hole is compatible with most of camera tripod or camera stand, so you can fix the camera at a secure place. Connects to your local area network. Connects to 5V DC power adapter. When the IP camera is not functioning properly, you can press reset button to reset the IP camera.
1.4 Installing the Network Camera Please follow the following instructions to setup your new IP camera. 1. Secure the IP Camera to the tripod or camera stand by mounting hole. If you want to place the IP camera on desk, please make sure it will not fall down by accident. 2. Connect Ethernet cable to LAN port. For first‐time installation you’ll need Ethernet cable to do configuration; If this IP camera is configured to use wireless network, you can skip this step. Connect Ethernet net cable 3.
If everything’s ok, you should see the POWER LED light up (and Ethernet LED, if Ethernet cable is inserted). If not, please recheck every step and try again, or ask your dealer of purchase for help. Please note if you configured IP camera to switch LED lights off, two LED lights won’t light.
Chapter II: Accessing the Camera’s Web Interface 2.1 Network Setup This IP camera’s default IP address is 192.168.2.3, and you must use a computer that uses 192.168.2.x IP address to connect to it. Please follow the following instructions to setup your computer’s IP address: 1. Please click ‘Start’ button and then click ‘Control Panel’. 2.
3. If you didn’t see ‘Network and Internet’ in control panel, please look for ‘Network and Sharing Center’ icon and double‐click it. 4. Click ‘Local Area Connection’ 5. Click ‘Properties’ 6.
7. Click ‘Use the following IP address’, and then input ‘192.168.2.1’ in ‘IP address’ and ‘255.255.255.0’ in Subnet mask’, just like shown on the left.
2.2 Connecting to the Camera’s Web User Interface and Installing the ActiveX Plugin (IE only) For first‐time installation, you can connect to IP camera by Internet Explorer web browser by entering its default IP address: 192.168.2.3 in address bar: The use login screen will appear when you get connected: IP Camera’s administrator username is ‘admin’ (lower case) and password is ‘1234’ by default. Click ‘OK’ button or press ‘ENTER’ key on your keyboard when you finish entering username and password.
This message prompts you that you need to install ActiveX plugin before you can see the video from IP Camera. Click ‘Download ActiveX’ link to install ActiveX plugin: Click ‘Run’ to start installation.
Click ‘Run’ to begin installation. You may see UAC (User Account Control) message after you click ‘Run’ button: Click ‘Yes’ to continue. Installation procedure will begin: Click ‘Next’ and ‘Install’ when you’re prompted to install ActiveX control.
Click ‘Finish’ to close the window.
2.
The descriptions of these items are listed below: Item Snapshot Record Fit to window Full Screen Digital Zoom Description Take a snapshot (save a picture) of current live view. Click the folder field (‘c:\’ by default) and you’ll be prompted to select a folder in your computer, and click ‘Get snapshot’ button to save a picture. Start recording video.
When you’re enlarging image (i.e. Zoom Factor > 100%), a green rectangular will appear in the image area: Drag the green rectangular to move the position of enlarged area in image.
Chapter III: Setting Up the Network Camera To setup the IP camera, please log onto IP camera’s web interface and click ‘Setup’ link on the upper‐right corner: The setup menu will appear: There are five setup categories: Basic, Video, Events, System, and Status, which are located at the left of web interface. When you click on the link of every category, it will expand and show sub‐menu. Please refer to following chapters for detailed instructions.
3.1 Basic Network Settings In this menu, you can setup Ethernet network settings.
Item Network Type Description Select the type of Ethernet connection: Static IP, DHCP, and PPPoE. Please select one from dropdown menu, if you’re not sure, please consult your network administrator or ISP. Static IP: IP: Please assign an IP address to this IP camera. Netmask: Please input the netmask of IP address. Gateway: Please input the gateway address of your network. Primary DNS: Input the IP address of DNS server. Secondary DNS: Input the IP address of secondary (backup) DNS.
have to add a colon and port number after IP camera’s IP address. For example, if the camera’s IP address is 192.168.2.3 and HTTP port number is 82, you have to input ‘http://192.168.2.3:82’ in web browser’s address bar. DHCP: IP camera will obtain IP address from DHCP server on your local area network automatically. PPPoE: IP camera will connect to network by PPPoE. Please input PPPoE user name and password, and input MTU value when required.
3.2 Wireless You can establish wireless connections to other network devices such as network AP.
When you enter this page, IP camera will scan for wireless devices nearby automatically and display them here. The descriptions of these items are listed below: Item Wireless Connection Network Type Mode Description You can enable or disable wireless functionality here. Please note: You can switch wireless network off, but you can’t switch wired Ethernet off. Select the type of network you wish to connect: Infra (infrastructure: wireless access point) or Ad Hoc (point to point wireless connection).
Band Available Networks kinds of wireless network. If you select B, G, or N only, then IP camera will be able to communicate with wireless network of same operating mode only. Select wireless band: 20MHz only or 20/40MHz auto switch. It’s recommended to select ‘Auto 20/40MHz’. IP camera will list all nearby networks and their parameter in this field. If the network you wish to connect does not appear hear, click ‘Refresh’ to rescan again.
None: no encryption WEP: use WEP encryption WPA‐PSK: Use WPA with PSK encryption. WPA2‐PSK: Use WPA2 with PSK encryption. Encryption Type The authentication type you selected here must be identical with the setting of access point. Select wireless encryption type. This option will vary depends on the authentication type of the network you wish to connect. WPA Pre‐shared Key The encryption type you selected here must be identical with the setting of access point.
This setting must be identical with the setting of the network you wish to connect. You can also setup encrypted wireless connection by WPS (Wi‐Fi Protected Setup): The descriptions of these items are listed below: Item Self PinCode Configure via Push Button Configure via PinCode Description Displays the 8‐digit pin code of this IP camera. Write this number down and you’ll need this number so get connected with other WPS‐enabled network devices when requested.
3.3 Dynamic DNS If your Internet service provider didn’t issue you a fixed IP address, you can use this function to report your current IP address to dynamic DNS service provider, so you can locate your IP camera without having a fixed IP address.
Provider Host Name User Name Password functionality, orselect ‘Disable’ to disable DDNS functionality. Select Dynamic DNS service provider you’re using from dropdown menu. Input the hostname you registered with DDNS service provider. Input the user name you registered with DDNS service provider. Input the password you registered with DDNS service provider. Click ‘Apply’ button to save changes you made. TIPS: You can register free (or paid) dynamic DNS service from following website: Dyndns: www.dyndns.
3.4 Date & Time You can setup IP camera’s system date and time here. Maintaining a correct system time is very essential when you need to replay recorded video. The descriptions of these items are listed below: Item Mode Description Select date & time setup mode: Manually: Set time manually.
Set Date/Time Manually Synchronize to PC time NTP Server Time Zone Daylight Saving NTP: Use NTP (Network Time Protocol) to setup date and time automatically via network. If you have Internet connection or there’s a NTP server on your local network, you can select this function to help you to keep IP camera’s date and time correct. There are 6 fields for you to input current date / time. The format is: YYYY/MM/DD HH:MM:SS Click this button the fill date / time field with your computer’s date and time.
3.5 Users Besides default system operator account ‘administrator’, you can add additional operator account or user account here: Operator accounts can perform all functionalities and do configurations of this IP camera, while guest accounts can view image only.
The descriptions of these items are listed below: Item User List User Name Password Confirm password Authority Add Modify Remove Anonymous Login Description Lists all existing operators / users here. To modify an operator / user’s setting, click his / her name here first. Input user’s name here. Input user’s password here. Input user’s password here again for confirmation. Select this user’s privilege: Operator can view video and go to setup page to change video setting. Guest can view video only.
welcomes everyone to view the video. If you only want to allow registered user to login, select ‘Disable’. Click ‘Apply’ button to save changes you made. 3.6 UPnP When you enable this function, Windows computers can discover this IP camera from windows network neighbor directly, and you don’t have to know this IP camera’s IP address in advance (This only works on local area network).
Select ‘Enable’ to enable this function, or select ‘Disable’ to prevent users on local area network to discover this IP camera. 3.7 Bonjour When you enable this function, Macintosh computers can discover this IP camera from safari web browser directly, and you don’t have to know this IP camera’s IP address in advance (This only works on local area network). Select ‘Enable’ to enable this function, or select ‘Disable’ to prevent users on local area network to discover this IP camera by safari browser.
Tips: Bonjour function must be enabled in safari browser first.
Chapter IV: Video Configuration In video configuration setup page, you can change the resolution and frame rate, so you can decide the video quality by the bandwidth you have. 4.1 Video Settings You can change resolution and frame rate settings here. The descriptions of these items are listed below: Item Resolution Description Change video resolution from dropdown list.
Please note: When the environment is dark, this IP camera will automatically adjust frame rate to a lower setting to provide better video quality by using a longer exposure time. Power frequency Select the AC utility power’s frequency (50 or 60Hz). This will help reduce the flicker of video when there’s certain kind of lamp. If you don’t know the frequency of power you’re using, you can consult your utility power company. Click ‘Apply’ button to save changes you made. 4.
Item Brightness / Contrast / Saturation / Sharpness / Hue Reset to default Save value Description Change video’s appearance. If you think you don’t like the video as it appears, you can change these parameters. Drag the blue lever by mouse to change the value. Click this button to reset all settings back to default value (50). Save changes you made.
Chapter V: Event Configuration This IP camera is capable to detect motions. You can use this function to use this IP camera as a security alarm and send the image to you by E‐Mail or upload to FTP server when there’s motion. 5.1 Motion Detection Setup You can enable or disable motion detection settings here. The descriptions of these items are listed below: Item Motion Detection enable Motion Detection Interval Description Select ‘Enable’ to enable motion detection function, or ‘Disable’ to disable it.
Send snapshot to Select ‘Enable’ to send a snapshot picture E‐Mail to designated email recipient; select ‘Disable’ to disable this function. Send snapshot to Select ‘Enable’ to upload a snapshot FTP picture to designated FTP server; select ‘Disable’ to disable this function. Click ‘Apply’ button to save changes you made. 5.1.1 Detection Region You can setup the area in video where IP camera should detect changes in video (motion).
The descriptions of these items are listed below: Item Region 1 / Region 2 / Region 3 Description Check the box to enable this motion detection area. A rectangle will appear on the video view when it’s checked (enabled).
of motion detection rectangle, and drag the mouse. Move motion detection area: Sensitivity Threshold Refresh Save Put the mouse within the motion detection area, and drag the mouse. Change the sensitivity of motion detection. Set to a higher value (right) and IP camera will trigger the alarm when there’re only small changes in video. If you found that IP camera sends E‐mail or uploads picture to FTP too frequently, and there’s nothing happen in the snapshot video, you can set to a lower value.
When you select this setup page, you’ll see the following setup page: The descriptions of these items are listed below: Item FTP Server User Name Password Port Description Input the IP address or host name of the FTP server. Input the user name required by FTP server. Input the password of FTP server. Input the port number of FTP server, this should an integer between 1 to 65535.
Path Passive mode Please don’t change this value until instructed by FTP server’s administrator. Input the path (folder) you wish to save snapshot file on FTP server. If you don’t want to specify folder, you can leave this field blank, and snapshot files will be saved in the default folder when logged onto FTP server. Default setting is ‘Enable’ (use passive mode). If the FTP server you’re going to use does not support passive mode (using active mode), select ‘Disable’ here.
When you select this setup page, you’ll see the following setup page: The descriptions of these items are listed below: Item Public Server Description If you’re using Hotmail, Yahoo mail, or Google mail, select appropriate item from dropdown menu, and IP camera will fill the SMTP server address and port number for you automatically.
SMTP Server SMTP Port Recipient E‐Mail Address Sender E‐Mail Address SSL/TLS SMTP Authentication Account Password Input the host name or IP address of SMTP server. SMTP server is usually provided by your ISP. Input the SMTP port number here. Most of SMTP servers use port number ‘25’, while some SMTP servers uses encrypted connection and port number is ‘465’. Consult mail server administrator when in doubt. Input E‐mail recipient (receiver)’s E‐mail address here.
Click ‘Apply’ button to save changes you made. You can also click ‘Send a test E‐mail’ button to send a test E‐mail to SMTP server, and a message box will appear to indicate if the E‐mail send is successful, so you can examine if the parameters you set in this page are correct.
Chapter VI: System Configuration You can configure the basic system settings in this setup page, or backup / restore system configurations. 6.1 “Basic” Settings You can set the camera’s name and password here. You can also change the behavior of LED lights. The descriptions of these items are listed below: Item IPCamera Name Administrator Password Confirm Password LED Indication Description Set the name of IP camera.
‘off’ here, so other people can’t identify if the IP camera is working by them. Click ‘Apply’ button to save changes you made. 6.2 “Advanced” Settings You can save or restore IP camera’s configuration file here. You can also reboot the IP camera remotely here. The descriptions of these items are listed below: Item Firmware Filename Backup Config Description You can improve the functionality of this IP camera by uploading new firmware file when available.
Restore Config Reboot Now Reset to default configuration as a file and save it on your computer’s hard drive. Click ‘Browse’ button to select a previously‐saved configuration file on your computer’s hard drive, and then click ‘Apply’ to upload the configuration file. Click this button to reboot IP camera. This function is useful when you think IP camera is not working properly. Reset the IP camera’s setting back to default value.
Chapter VII: System Status You can view the status of this IP camera, which is helpful when you need to do detailed configuration, or debug. 7.1 System Information You can see system‐wide information of this IP camera here.
A system information summary page will appear like this: 54
7.2 System Log The IP camera’s usage and actions will be displayed here. The system log will appear here, you can use scroll bar to view logs, with some adjustable parameters: The descriptions of these items are listed below: Item Log Level Remote Log Description Select the log level from dropdown list. Select 0 and the IP camera will only log very important information, or select 4 to log everything. This IP camera can send log information to a remote server for archive.
Remote Log Server Input the IP address or host name of log server you wish to use. Click ‘Apply’ button to save changes you made.
Chapter VIII: Advanced Operations In this chapter, you’ll learn how to apply a free DYNDNS account to use with this IP camera when you don’t have a fixed IP address, and view the video of this IP camera on your iPhone. 8.1 Applying for a Free DynDNS Account If your ISP issues you with an IP address which is not fixed, please follow the following instructions to apply for a free DYNDNS account to get a host name which is dynamically mapped to your current IP address. 1.
4. Fill all fields appear in this menu, and click ‘Create Account’ button to create a new account. You’ll be prompted if the account you selected is not available. 5. When you see this image, you’ll receive an e‐mail confirmation at the e‐mail box you registered with dyndns.org.
6. Check your e‐mail box and you should be able to get confirmation e‐mail. Click the link to connect to dyndns.org website and complete registration procedure. If you didn’t get the mail, please re‐check the e‐mail address, or click ‘resending it’ link in last step. Also, if nothing happen after you click the link, please copy the link text and paste it in web browser’s address bar.
7. When you see ‘Account Confirmed’ webpage, indicates your dyndns.org account has been confirmed and activated. Now you can click ‘Create a dynamic DNS host within our Free domains’ link to continue. 8. Click ‘Create Hostname’ button.
9. In this page: Input the hostname of your choice in ‘Hostname’ field, Select a domain name in dropdown menu, Select ‘Host with IP address’ for ‘Service Type’, Input current IP address in ‘IP Address’ field (or click the link below to use detected IP address to fill this field’. 10. Click ‘Add to cart’ continue.
11. Click ‘Next’ to continue. 12. Click ‘Activate Services’ to continue. 13. When you see this message, indicates your free dyndns.org hostname mapping service has been activated. You can go to chapter 2‐2‐3 to use your dyndns.
Chapter IX: Windows Surveillance Utility Besides using web browser to operate this IP camera, you can also use windows utility to use this IP camera, which provides faster access to all functions of this IP camera. 9.1 Installing the Network Camera Administration Software There are two files in the surveillance software’s folder: Setup_Admin_xxx and Setup_Viewer_xxx (xxx is version number and will be different as the version number changes). Please install Administration software first.
2. You can specify the destination folder of software installation, you can just use the default folder, and click ‘Next’ to continue. 3. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, than click ‘Next’ to continue.
4. Here lists all options you chose in previous steps, if everything’s correct, click ‘Install’ to start installing procedure, or click ‘Back’ to go back to previous step to modify installing settings. 5. The installing procedure will take some time, please be patient. 6. When you see this window, it means the software installing procedure is complete.
software will start after you click ‘Finish’ button, if you want to start it later, uncheck ‘Launch IPCam Surveillance Software’ box). 1. After software is launched, you can click on your local area network.
8. When one (or more) IP camera(s) is found: button to connect to IP camera by web browser, or click you can click button to configure its setting. You’ll be prompted to input IP camera’s administrator username and password if you wish to configure it: There are two setting pages.
You can configure IP camera’s IP address setting in this page. You can either use ‘DHCP’ (IP camera will acquire IP address from DHCP server on your local area network automatically), or ‘Manual IP’ (you have to input IP address manually). Security: You can change IP camera’s name, and change its administrator password here by inputting new password in both ‘New Password’ and ‘Confirm Password’ field.
9.2 Install Video Viewer 1. Double‐click Setup_Viewer_xxx file to start installation. 2. Click ‘Next’ to continue. 3. You can uncheck the boxes here if you don’t want to create desktop / quick launch icon, and click ‘Next’ to continue.
4. Please check if everything’s correct here. If you want to change any setting, click ‘Back’ to go back to previous page, or click ‘Install’ to start installation. 5. Installation procedure takes few seconds to few minutes to complete, please be patient.
6. Installation is complete when you see this message. You can click ‘Finish’ to finish installation procedure and launch utility, or unckeck ‘Launch IPCam Surveillance Software’ box before you click ‘Finish’ button if you don’t want to launch software after installation is complete.
9.2 Using the Network Camera Surveillance Software You can click ‘IPCam Surveillance Software’ icon from desktop, quick launch bar, or start menu to start the IP camera surveillance software. Before you start: IP camera surveillance software will only work when your monitor’s resolution is ‘1024 x 768’. Please change the resolution before you use IP camera surveillance software, or it won’t start.
You can put the mouse cursor on a certain component and see its button name, and here’re detailed descriptions of all buttons: Item Video displaying area Language Description The image of all connected cameras will be displayed here. Select a language from this dropdown menu to change display language. Display layout Change camera image display layout (Click a layout icon to change camera display layout). There are 8 kinds of available display layouts.
Recording cameras. Start video recording. Configure Software / camera configuration. Playback Playback a recorded video file. Snapshot Take a snapshot of current camera. Message Displays all system messages like camera is display disconnected etc. Close window Terminates IP camera surveillance software. (stop surveillance) Minimize window Minimizes IP camera surveillance software window. Video displaying area Displays the image of all cameras by the display layout you selected.
9.3 Configuring the Network Camera Surveillance Software 9.3.1 Camera Configuration Before you use this IP camera surveillance software, you must configure the camera(s) you wish to connect.
9.3.1.1 “Camera” Settings In this tab you can configure all cameras you wish to connect. Up to 16 cameras can be connected simultaneously: Here are the descriptions of all setting items: Item Channel Camera Search Select Refresh Name* Description Select the channel number you wish to set. All cameras found on your local network will be displayed in ‘Camera Search’ box.
is the first 6 bytes of camera’s MAC address, you can change the name of camera so you can remember the camera’s location of purpose easily. Model Displays the model of selected camera, this field can not be changed. IP* Input the IP address of camera. Username* Input the user name of camera. Web Port* Input the web port of the camera. By default it’s ‘80’. Password Input the password of camera. Default value is ‘1234’. You should change the password if you changed the password of selected camera.
9.3.1.2 Scheduled Recording In this tab, you can setup scheduled video recording, so you can record the video captured by all cameras you have by a pre‐defined schedule. Here are the descriptions of all setting items: Item Channel One Time Schedules New (One Time Schedules) Description Select the channel number you wish to set. You can specify the one‐time schedule for selected camera; this schedule will be executed once only.
Please specify the time duration of this one‐time schedule (the date and time of ‘From’ and ‘To’), then click ‘OK’ to save settings. Edit Delete New (Weekly Schedules) Please note you must set a schedule that will be happened in the future, you can not set a schedule in the past. You can modify a scheduled recording item. Select a schedule in ‘One Time Schedules’ list, and click ‘Edit’ button to edit the start and end time of this schedule. Delete a selected schedule item.
duration of video recording in ‘Period’ field (format is HH:MM:SS), and the end time will be calculated automatically and displayed in ‘To’ field. You can also click ‘All Time Record’ button to define a recording schedule that will be executed every weekday, from 12:00:00AM to 11:59:59PM. Edit Delete OK Cancel Click ‘OK’ to save changes. You can modify a scheduled recording item. Select a schedule in ‘One Time Schedules’ list, and click ‘Edit’ button to edit the start and end time of this schedule.
9.3.1.3 Audio For cameras that support audio, you can use this tab to decide if you wish to hear the audio captured by selected camera. Here are the descriptions of all setting items: Item Channel Mute Audio Record Video Only OK Cancel Description Select the channel number you wish to set. Check this box and the IP camera surveillance software will not play the audio captured by this camera. Check this box and the IP camera surveillance software will not record the audio captured by this camera.
9.3.1.4 MotionTriggered Recording With this function activated, only motions captured by the camera will be recorded, so you don’t have to waste hard disk storage space on images you don’t need to pay attention to. WARNING: For applications that security is highly concerned, it’s not recommended to use this function since some tiny changes you may need to know may not be able to trigger the camera and the camera will not start recording.
when motion is triggered Send mail when motion is triggered OK Cancel detected by the camera. Send an email to a pre‐defined address when a motion has been detected by the camera. Save settings in this tab. Discard all settings in this tab.
9.3.2 General Settings You can set system‐wide settings of this IP camera surveillance software in this menu. 9.3.2.1 General All general settings like file storage directory and recording spaces can be set here.
Item Data Directory Free Recording Space Max Video File Size Description Set the directory (folder) you wish to store the recorded video and captured image. You can click ‘Browse’ button to pick a directory in your hard disk. Displays remaining storage space. Cycle Recording Defines the maximum file size of every video file. When the size of file exceeds this value, IP camera surveillance software will open another file to record the video.
9.3.2.2 Email Setting If you want to use motion detection function and wish to get an email that contains the image captured by the camera, please setup your email related parameters here first. Here are the descriptions of all setting items: Item Description E‐Mail Subject Specify the subject of sending email. Recipient Here lists all email addresses you set.
Address New Click this button and you’ll be prompted to input the email address. Click ‘OK’ to save changes. Edit Select an email address from ‘Recipient E‐Mail Address’ box, and click ‘Edit’ to edit the email address. Delete Delete selected email address. Sender E‐Mail Specify the email address of email sender. Address SMTP Server Specify the IP address or host name of the SMTP server you wish to use.
SMTP Password OK Cancel to receive email). Please refer to the setting of your email software or ask your ISP / network administrator if you’re not sure about this. Input the SMTP password of your SMTP server here. In most cases, it’s the same with your POP3 password (the one you used to receive email). Please refer to the setting of your email software or ask your ISP / network administrator if you’re not sure about this. Save settings in this tab. Discard all settings in this tab. 9.3.2.
Here are the descriptions of all setting items: Item Enable Disable Password Confirm Password Description Requires password authentication when this software starts. Password authentication is not required when this software starts. Input the password you wish to use here. Input the password you wish to use here again. 9.3.2.
This tab shows the version number of the IP camera surveillance software you’re using.
9.4 Changing the Display Layout This IP camera surveillance software provides 8 kinds of display layout: Every layout displays different number of camera and camera arrangement, you can click the icon that presents a specific kind of layout, and the video displaying area will change accordingly. Layout style 1: 1 Camera only Displays the video of 1 camera only. Layout style 2: 4 Cameras Displays the video of up to 4 cameras.
Layout style 3: 6 Cameras Displays the video of up to 6 cameras. Layout style 4: 8 Cameras Displays the video of up to 8 cameras. Layout style 5: 9 Cameras Displays the video of up to 9 cameras. Displays the video of up to 10 cameras.
Layout style Displays the video of up to 13 cameras. 7: 13 Cameras Layout style Displays the video of up to 16 cameras.
9.5 FullScreen Mode If you want to use all available spaces on your monitor to display surveillance image, you can click ‘Full Screen’ button to switch display mode to full‐screen mode. To exit full‐screen mode, press ‘ESC’ key.
9.6 Scan If you have more than one camera configured, and you wish to switch the displaying image between cameras, you can click ‘Scan’ button to switch between all configured cameras. NOTE: If a camera is configured but disconnected, it will still be displayed in a scan sequence (you’ll see nothing and you’ll see ‘Disconnected’ text displayed at the upper-left corner of display image).
9.7 ZoomIn/ZoomOut For cameras that support zoom‐in / zoom‐out function, you can use this function to see more objects that fall in the scope of camera’s view, or enlarge the image size of a certain object to see its detail.
9.8 PTZ For cameras that support pan ‐ tilt function, you can change the position that camera points to, to see different places that fall in the scope of camera’s view. Please select a camera in video displaying area by clicking on its image, and then click the directions you wish the camera to move to (total 8 directions available). Click ‘Home’ button ( ) to return to camera’s home (default) position.
9.9 Snapshot You can take a snapshot of selected camera and save it to ‘Snapshot’ sub‐folder of pre‐defined data directory. Click snapshot button once to take a snapshot; you can take as much snapshot as you want before hard disk is full.
9.10 Recording You can start video recording of selected camera manually by clicking ‘Start Recording’ button: When recording starts, you’ll see a message displayed in message displaying box like ‘1/1 10:00:00, Camera 2 Start Manual’, which means camera 1 starts recording manually on 1/1 at 10:00:00. To stop recording, click ‘Start Recording’ button again, and you’ll see a message displayed in message displaying box like ‘1/1 10:00:00, Camera 2 Stop Manual’.
9.11 Video Playback You can playback all recorded video by clicking this button. A new window will appear: You have to search the video file before you can play it. There are two kinds of video search: Time Search (search all videos file that falls in a specific period of time) and Motion Search (search all videos recorded by motion detection function and falls in a specific period of time).
Chapter X: Appendix 10.1 Troubleshooting Please don’t panic when you found this IP Camera is not working properly. Before you send this IP Camera back to us, you can do some simple checks to save your time: Problem description Possible solution(s) Can’t connect to IP Camera 1) Please check the IP address of IP Camera again. 2) Please make sure the network cable is correctly connected to your local area network. 3) Please make sure power cable is correctly connected to IP Camera.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directive (2006/95/EC). Equipment : Model No. : 1.3Mpx Wireless Network Camera IC-3015Wn Report No. : EA161515 EH161515 L161515L356 ER161515AC ER161515AI The following European standards for essential requirements have been followed: EN 50385:2002 EN 301 489-1 V1.8.1 (2008-04) EN 301 489-17 V2.1.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine‐readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
107
