- Edimax Wireless LAN Access Point User's Manual

W ireless L AN AP Configuration
Chapter 3 Wireless LAN AP Configuration
3.1 Getting Started
This Access Point provi des web-bas ed configuration tool
allowing you t o c onfigure fr om wired or wireless stations.
Follow the instructi ons belo w to get started c onfiguration.
From W ired Station
1. Make sure your wired station is i n t he s ame s ubnet wit h
the Access Point.
The def ault IP Address and Sub Mas k of t he Access Point
is:
Default IP Address: 192.168. 2.1
Default Subnet: 255.255.255.0
Configure your PC to be in the same subnet with the
Access Point.
1a) W indows 95/98/Me
1. Click the Start butt on and sel ect Setti ngs, then clic k
Control Panel. The Control Panel window will appear.
2. Double-clic k Network ic on. T he Network window will
appear.
3. Chec k your list of Network Components . If TCP/IP is not
installed, click the Add button to install it now. If TCP/IP is
installed, go to step 6.
4. In t he Network Component Type dialog box, s elect
Protoc ol and clic k Add but ton.
5. In t he Select Network Protoc ol dial og box, selec t
Microsoft and TCP/ IP and then click the OK button t o
start installing the TCP/IP protocol. You may need your
Windows CD to c omplete t he i nstallati on.
6. After installing TCP/IP, go back to the Network dial og
box. Selec t TCP/IP from the list of Network
Components and t hen click the Pr operti es button.
6