- Edimax Wireless LAN Access Point User's Manual
W ireless L AN AP Configuration
Authentication
Client table
This tabl e recor ds the clients of t he
RADIUS ser ver that need to
authenticat e wireless LAN us ers.
Authentication client information
includes the “Client I P” and “S ecret
Key”. An authentication client has to
use t he “Secret Key” to login to t he
RADIUS ser ver befor e it can start to
authenticat e wireless LAN us ers. An
authentication client can be an access
point .
Add an
authentication
client
Fill in the “Client IP”, “Secret Key” and
“Re-Type Secret K ey” of the new
authentication client t o be added and
then click “Add”. Then this new
authentication will be added into the
authentication client t able bel ow. If you
find any t ypo before adding it and want
to ret ype again. J ust clic k “Reset” and
“Client IP”, “Secr et K ey” and “Re-T ype
Secret” fields will be cleared.
Remove
authentication
client from the
table
If you want to remove some
authentication client from t he table,
select the authentication clients you
want t o remove in the table and then
click “Delete S elected”. If you want
remove all user authentication clients
from the table, j ust clic k “Delet e All”
butt on.
Reset
Click “Reset” will clear your current
selections.
Click Apply butt on at the bottom of the screen to save t he
above configurations. You can now configure other advanc e
sections or st art using the Access Point.
32