- Edimax Wireless LAN Access Point User's Manual

W ireless L AN AP Configuration
MAC
Address
If you want t o bridge more than one wired
Ether net networks toget her with wirel ess
LAN, you have to set this access point t o
“AP Bridge-Point to Poi nt mode”, “AP
Bridge-Point t o Multi-Poi nt mode” or “AP
Bridge-WDS mode”. You have to enter the
MAC address es of other access poi nts t hat
join the bridging work.
Associated
Clients
Click “Show Active Clients” button, then an
“Active Wireless Client Table” will pop up.
You c an see the st atus of all acti ve wireless
stations th at are c onnecting to t he access
point .
Click Apply butt on at the b ottom of the screen to save t he
above configurations. You can now configure other advanc e
sections or st art using the Access Point.
Active W ireless Client Table
“Active Wireless Client T able” rec ords t he s tat us of all ac tive
wireless st ations t hat are c onnecting to t he access poi nt. You
can lookup the MAC Address, N umber of Transmitt ed Pac kets,
Number of Recei ved P ac kets and Encr yption Status of eac h
active wireless client in this table.
16