User Guide

At this point the PrintSir setup is complete, and
you can begin setting up the NetWare print
server and print queue objects:
9. Run the NetWare PCONSOLE program.
10. Change the current file server, if necessary,
using the Change Current File Server menu
selection.
11. Choose the Print Queue Information menu
selection.
12. Press the Insert key to add a new print queue.
13. Type in a print queue name, such as “PQ” or
“Q1”.
14. You have now successfully created the print
queue that your PrintSir will serve. Press the
Escape key until the Available Options main
menu is displayed.
15. Select Print Server Information.
16. Press the Insert key to add a new NetWare print
server object. The print server name can be
52