Manual

8. To print a test page and apply all the settings, please click “Yes”.

9. If the test page is printed without problem, please click “Yes”. If it is failed to print,

please click “No” to go back to “Printer configuration - fedora” screen and configure

again.

12.2 Console Mode

To configure the Combo Print Server for LPD printing, perform the procedures below:

1. Enable Combo Print Server’s TCP/IP Support.

2. Set up Combo Print Server’s IP address.

3. Verify Combo Print Server’s IP Address.

4. Configure remote LPD printing on the host.

5. Print a test page.

In the next sections, we will describe these five procedures step by step.