Manual

6. Network Port Setup
“Network Port Setup” Utility offers a very simple method to add or remove Combo Print
Server’s printer port from the client’s computer.
During the Combo Print Server’s installation procedure, the “Setup Wizard” will
automatically add the printer port of the Combo Print Server you have selected to user’s
computer (see below).
If you have just installed another new Combo Print Server in the network, you can run
“Setup Wizard” or run this program. This program will search for new Combo Print
Servers and allow you to add the new network printer port into your computer
conveniently. Perform the standard Add Printer procedure then you can print directly to
the printer through the newly installed Combo Print Server.
Select the network ports in the “Available Ports” list and click “>” to add ports. If you
want to add all available ports, please click “>>”. To cancel some of the network ports or
all ports from the “Chosen Ports” list, please click “<” or “<<”.
Note: Please be aware that Network Port Setup Utility can only detect and configure all
Combo Print Servers within the same network; it cannot search and configure the
Combo Print Servers on other subnets across network segments.
27