- EDIMAX 802.11b/g WLAN USB adapter with Wi-Fi Detector User's Manual

3 How to charge the Wi-Fi Detector
1. Remove the cap from the Wi-Fi Detector, slide the power switch to the “ON” position and
carefully insert the USB connector into any available USB port on your computer. You
will see the recharging screen.
The battery strength indicator will be animated while the Wi-Fi detector is being recharged.
The “Link/Act” icon will blink when the Wi-Fi detector is being used as a wireless USB
adapter to surf the internet.
2. When the Wi-Fi detector is finished recharging it will automatically stop charging the
battery. When it is finished recharging the battery you will see “Charge Finish” displayed
on the LCM and the battery strength indicator will stop blinking.
3. If you slide the power switch to the “OFF” position when in recharging, the Wi-Fi
detector will stop recharging the battery and you will see “Stop charging” displayed on
the LCM and the battery strength indicator will stop blinking.
4