User Guide

Parameter Description

Power Consumption Setting Continuous Access Mode (CAM) – The adapter will always set

in active mode.

Maximum Power-Saving Mode – Enable the adapter in the

power saving mode when it is idle.

Fast Power-Saving Mode – Enable the adapter in the power

saving mode when it is idle, but some components of the adapter

is still alive. In this mode, the power consumption is larger than

“Max“ mode.

Fragementation Threshold The value defines the maximum size of packets, any packet size

larger than the value will be fragmented. If you have decreased

this value and experience high packet error rates, you can

increase it again, but it will likely decrease overall network

performance. Select a setting within a range of 256 to 2346 bytes.

Minor change is recommended.

RTS / CTS Threshold Minimum packet size required for an RTS/CTS (Request To

Send/Clear to Send). For packets smaller than this threshold, an

RTS/CTS is not sent and the packet is transmitted directly to the

WLAN. Select a setting within a range of 0 to 2347 bytes. Minor

change is recommended

6.5 Software AP Mode

This adapter can run as a wireless AP. The relative configurations of the AP including

channel, SSID, MAC Address Filtering, WEP encryption and so on are described as follows.

6.5.1 AP Connection Status