User Guide

4 How to use the Wi-Fi Detector
1. Slide the power switch to the “ON” position, and a welcome screen will greet the user.
2. After the welcome screen is displayed the Wi-Fi detector will automatically enter
scanning mode to detect Wi-Fi signals.
In scanning mode the display will display the total number of both non-encrypted and
encrypted Wi-Fi signals detected.
3. Once scanning mode is complete, the detector will enter its standard display mode.
The detector automatically sorts the signals by the following criteria:
Non-encrypted AP’s according to signal strength followed by encrypted AP’s according
to signal strength.
2
3
4
5
6
1
7
8
5