user manual

99
IV‐1‐2‐2. WindowsVista

1.  Clickthe“Start”button(itshouldbelocatedinthelower‐leftcornerof
yourcomputer),thenclick“ControlPanel”.Click“ViewNetworkStatusand
Tasks”,thenclick“ManageNetworkConnections”.Right‐click“LocalArea
Network”,thenselect“Properties”.The“LocalAreaConnectionProperties”
windowwillthenappear,select“Internet
ProtocolVersion4(TCP/IPv4)”,
andthenclick“Properties”.



2.  Select“UsethefollowingIPaddress”and“UsethefollowingDNSserver
addresses”,theninputthefollowingvalues:

YourexistingstaticIPaddresswillbedisplayedinthe“IP
address”fieldbeforeyoureplaceit.PleasemakeanoteofthisIP
address,subnetmask,defaultgatewayandDNSserver
addresses.

IPaddress:192.168.2.10
SubnetMask:255.255.255.0
PreferredDNSServer:192.168.2.1

Click‘OK’whenfinished.