User guide

27
This setting must be identical to the setting
of the network you wish to connect to.
You can also set up an encrypted wireless connection through WPS (Wi-Fi
Protected Setup):
The descriptions of these items are listed below:
Item
Description
Self PinCode
Displays the 8-digit pin code of this
network camera. Write this number down
because you’ll need this number to
connect with other WPS-enabled network
devices when requested.
Configure via
Push Button
Click the ‘Start PBC’ button to start a
PBC-style WPS pairing sequence: Click this
button, then push the WPS button on the
access point (or click a software button in
the access point’s configuration web
page).
You must press the WPS button of the
wireless device you wish to connect to
within 120 seconds.
Configure via
PinCode
Click ‘Start PIN’ to start a PIN-style WPS
pairing sequence. You have to input the
WPS registrar’s SSID in the ‘Registrar SSID’
field first.
Click the ‘Apply’ button to save changes you made.