Owner manual

5
Chapter 2: About the Product
2.1 LED Definitions
LED
Status
Description
LAN
Green
LAN port connected
Blinking
LAN activity (transferring data)
Off
LAN port not connected
PLC
Green/Yellow
The green indicator turns on and the yellow indicator
blinks slowly when the device is detecting a
powerline link.
The green indicator turns on and the yellow indicator
blinks quickly to indicate data is being transferred
over the powerline link.
Off
No other PLC device detected
PWR
Green
Powered on
Off
Powered off
Note: The device will enter standby mode, and all LEDs will extinguish, after
5 seconds without any data transfer, including when the Ethernet cable is
disconnected. The Power LED will flash once every 15 seconds.