Manual

19
1. Press and hold the WPS/Reset button on the wireless router/access point
for the correct length of time (check router/access point’s user manual) to
activate its WPS for 2.4GHz or 5GHz.
2. Within two minutes, press and hold the WPS button on the extender for
two seconds to activate WPS. The WPS LED ( ) will flash slowly to indicate
WPS is activated (see LED Status).
3. The devices will establish a connection. When a connection is successful,
the extender’s WPS LED ( ) will display on - and remain on for 5 minutes
(see I-3. LED Status).
4. Please wait for 5 minutes until the extender’s WPS LED ( ) is off, and
repeat this process to set up your dual-band extender’s additional second
Press for two
seconds