Manual

Wireless LAN Access Point Configuration

DHCP Server Setting

DHCP Server will automatically give your LAN client an IP address. If the DHCP is

not enabled then you’ll have to manually set your LAN client’s IP address.

Parameter Description

Default Gateway IP Specify the gateway IP in your network. This IP address should be

different from the Management IP.

Domain Name Server IP This is the ISP’s DNS server IP address that they gave you; or you can

specify your own preferred DNS server IP address.

Start IP/End IP You can designate a particular IP address range for your DHCP server to

issue IP addresses to your LAN Clients. By default the IP range is from: Start

IP 192.168.2.100 to End IP 192.168.2.200.