User Manual

7. Click on Restart to take the new settings effect.

Now the installation is complete. You can connect the adapter to a

network device by an Ethernet cable:

1. Connect an Ethernet cable to the Ethernet port on the adapter.

2. Connect the other end of the Ethernet cable to your network hub,

switch or router.

The Link LED should light up green to indicate a proper physical

connection between the adapter and the network. If the Link LED

doesn’t light up, please verify the cable connections between all the

network devices.

* Actual strings depend on your operation system. These screen shots

are from Mac OS X v10.4 and might vary slightly for each operation

system.