Instruction Manual

22
┬ ┬ ┬ ────┬──────
│ │ │ └ Channel Name
│ │ └─────── Channel Number
│ └────────── 2
nd
Layer Channel Number
└────────────── 1
st
Layer Channel Number
Fig. 18: Channel Banner (Cascade Layer)
7.2.3. Return from cascade port
After entering cascade port, press <R> will return to upper layer OSD
menu.
7.3. Setup in OSD: <F1>
Please use <Up> or <Down> arrow key to select the item you want to
change, and use <Left> or <Right> arrow key to change the settings.
Press <ESC> to exit and save the setup settings.
Figure 19: OSD Setup
7.3.1. Scan Mode
¾ Select:
Scan the selected channels marked with S in STA column on OSD main
menu.
¾ PC ON:
Scan all powered on PC channels
s
s