User's Manual

63
3-5 System Reset
When you think the wireless access point or wireless client is not working
properly, you can use this function to restart the access point or wireless
client; this may help and solve the problem.
This function is useful when the access point or wireless client is far from
you or unreachable. However, if the access point or wireless client is not
responding, you may have to switch it off by unplug the power plug and
plug it back again after 10 seconds.
To reset your access point or wireless client, please click ‘System Reset’
button and the following message will be displayed:
Click ‘OK’ to reset the access point or wireless client, or click ‘Cancel’ to
abort. Please remember all connections between wireless client and
access point will be disconnected.