User's Manual

52
Here are descriptions of every setup item:
Item Description
Enable Remote
Logging
Enable or disable remote logging to the FTP
Server you have assigned.
FTP Server Please input the IP address of the FTP server onto
which the logs of the access point will be
uploaded.
FTP Folder Please input the folder name into which the logs
will be uploaded.
FTP Username Please input the FTP username for logging.
FTP Password Please input the FTP password for logging.
Logging Interval The period in hours of the scheduled log uploads.
Enable UPnP When you enable UPnP function, you are able to
access the home gateway device and configure its
port mapping table to enable accessing the access
point remotely.
Base Port The port at the Home Gateway that the device will
be mapped to. In case that the selected port is
already mapped in the gateway, the next available
port will be used. When you want to access the
access point remotely, you can enter ‘http://the
router’s public IP address: port number’.
Enable NTP When the function is enabled, the access point uses
NTP protocol to obtain date & time.
NTP Server There are several NTP servers are available on
Internet. It is able to provide the date and time
information to the device through NTP protocol.
Please input the IP address of the NTP server here.
Time Zone
Please press
button, a drop-down list will be
shown, and you can choose a time zone of the
location you live.
Enable TR-069 TR-069 is a management protocol using by ISP
service provider to management the end-user
network devices remotely. You can enable this
function if it is required by your ISP service
provider.
ACS URL ACS server is a device deployed at ISP service