User's Manual

45
connections by WPS.
WPS Summary The WPS Summary table displays the WPS status
for the access point.
WPS Current Status: Display if the WPS function is
in process or in idle status.
WPS Configured: If you have set the security
before WPS process, here will display ‘Yes’ and the
security settings of the WPS connection will follow
your settings. If not, here will display ‘No’ and the
access point will random generate a set of security
settings for the WPS connection.
WPS SSID: Display the SSID setting for the WPS
connection.
WPS Auth Mode: Display the authentication
setting for the WPS connection.
WPS Encryp Type: Display the encryption setting
for the WPS connection.
WPS Key (ASCII): Display the WPS key setting for
the WPS connection.
NOTE: When you’re using PBC type WPS setup, you must press
‘PBC or WPS’ button (hardware or software) of wireless client
within 120 seconds; if you didn’t press PBC or WPS button of
wireless client within this time period, please activate PBC WPS
function of this access point again.