User's Manual

Here are descriptions of every setup item:

Item Description

WPS Select ‘Enable’ or ‘Disable’ to activate or

deactivate WPS function.

PBC mode When you select ‘PBC mode’, click ‘Start WPS’ to

start Push-Button style WPS setup procedure. This

access point will wait for WPS requests from

wireless clients for 2 minutes. The ‘WPS’ LED on

the access point will be kept flashing for 2 minutes

when this access point is waiting for incoming

WPS request.

PIN mode Please input the PIN code of the wireless client

you wish to connect, and click ‘Start WPS’ button.

The ‘WPS’ LED on the access point will be kept

flashing when this access point is waiting for

incoming WPS request.

WPS Status All information related to WPS will be displayed

here, they’re helpful when you’re setting up