User's Manual

38
key. If ‘Shared’ is selected, only devices with the
WEP key can successfully authenticate to the
access point.
Default Key You can set up to four sets of WEP key, and you
can decide which key is being used by default here.
If you don’t know which one you should use,
select ‘Key 1’.
WEP Key 1 to 4 Input WEP key characters here, you can use any
alphanumerical characters (0-9, a-z, and A-Z) and
the key length is 5 or 13 characters if you select
‘ASCII’ key format, and if you select ‘Hex’ as key
format, you can use characters 0-9, a-f, and A-F
and the key length is 10 or 26 characters Hex keys.
You must enter at least one encryption key here,
and if you entered multiple WEP keys, they should
not be same with each other.
After you finish with setting, please click ‘Apply’, and the following
message will be displayed:
When you see this message, the settings you made is temporarily save.
You can click ‘Cancel’ button to back to previous page, or click ‘Apply’
button to restart the wireless access point or the wireless client and the
changes will take effect after about 30 seconds.