User's Manual

2-7 Security Settings (Access Point Only)

This wireless access point provides many types of wireless security

(wireless data encryption). When you use data encryption, data

transferred by radio signals in the air will become unreadable for those

people who don’t know correct encryption key (encryption password).

Besides security settings, you can also configure the access policy to filter

the clients to connect to the access point.

You can click ‘Security Settings’ on the left of web management interface,

and the following web page will be displayed:

There are three types of security levels you can select: Disable (no

security - data encryption disabled), WEP, and WPA2 Pre-shared Key.

Please refer to the following sections for detailed instructions.

Note: To be able to use Wireless Protected Setup (WPS) features

(refer to Section 2-8), it is required that you enable the WPA2