User's Manual

31
to ’20 MHz’ unless you know what it is.
Channel Hopping Determines the system behavior when interference
is detected:
Always – Change channel as soon as interference
is detected on the current radio channel.
Conditional – Change channel as soon as
interference is detected only if no video is being
streamed through the system.
DLS When checked the system employs the direct link
protocol to enable direct client to client
communication. Use this option when client
devices in your network can stream video to each
other, such as in a Multi-Room DVR deployment.
After you finish with setting, please click ‘Apply’, and the following
message will be displayed:
When you see this message, the settings you made is temporarily save.
You can click ‘Cancel’ button to back to previous page, or click ‘Apply’
button to restart the wireless access point or the wireless client and the
changes will take effect after about 30 seconds.