User's Manual

Here are descriptions of every setup item:

Item Description

Broadcast SSID Decide if the wireless access point will broadcast

its own SSID or not. You can hide the SSID of your

wireless access point (set the option to ‘Disable’),

so only people those who know the SSID of your

wireless access point can get connected.

SSID Please input the SSID (the name used to identify

this wireless access point) here. You can input up

to 32 alphanumerical characters. PLEASE NOTE

THAT ESSID IS CASE SENSITIVE.

Beacon Interval

Set the beacon interval of wireless radio. Do not

modify default value if you don’t know what it is,

default value is 100

Country Code The available channels are different from

countries. If you are in different country, please

select the country code where you are located.

Note: This device will automatically limit the

allowable channels determined by the current

country of operation. Incorrectly entering the

country of operation may result in illegal

operation and may cause harmful interference to

other systems.

Frequency

(Channel)

Please select a channel number you wish to use. If

you know a certain channel number is being used

by other wireless access points nearby, please

refrain from using the same channel number

Rate(MCS) Set the wireless data transfer rate to a certain

value. Since most of wireless devices will negotiate

with each other and pick a proper data transfer

rate automatically, it’s not necessary to change

this value unless you know what will happen after

modification.

Channel

Bandwidth

Select wireless channel bandwidth (bandwidth

taken by wireless signals of this access point). It’s

suggested to select ‘20/40MHz’. Do not change