User's Manual

6
1-5 Familiar with your new wireless access point
Front Panel
LED Name Light Status Description
WLAN
On
Access Point Behavior - At least one Client is
associated with the Access Point.
Client Behavior – The Client is associated with an
Access Point at higher data rate (able to transfer HD
streaming).
Flashing
Client Behavior – The client is associated with an
access point at lower data rate (able to transfer SD
streaming).
Off
Access Point Behavior - No Clients are associated with
the Access Point.
Client Behavior – The Client is not associated with
an Access Point.
WPS
On
WPS pairing has finished successfully. This is a
temporary state that lasts for 2 minutes.
Flashing
WPS pairing is in progress. This is a temporary state
that lasts for 2 minutes or until WPS pairing.
Off WPS function is not enabled.
LAN
Flashing Activity on the wired network interface.
Off
The LAN port is either not connected or there is no
activity on the link.
Power/Standby
Green On The device is powered on.
Red On
The device is in standby mode which means there is no
traffic on Ethernet port.