Instruction Manual

All MAC-to-IP address entries will be listed in this page, and this broadband router supports
up 16 static DHCP leases:
To delete one or more entries listed here, please check the box of the mapping entry (under
‘Select’), and click ‘Delete Selected’ button.
If you wish to delete all mapping entries, click ‘Delete All’ button. To deselect all checked
boxes, click ‘Reset’ button.
When you finished with the settings in this page, you can click ‘Apply’ button to save
changes you made in this page, or you can click ‘Cancel’ to discard changes. After you click
‘Apply’ button, you’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband router, this
requires about 30 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.