Instruction Manual

Security
According to the security settings of the wireless
access point you with to connect, you’ll be
prompted to input WEP key / WPA passphrase so
you can pass the security check of access point.
A correct WEP key / WPA passphrase is
required to connect to wireless access point with
security setting. Please ask your wireless ISP for
correct WEP key / WPA passphrase.
If you wish to select another connection type as broadband connection type, click ‘Back’; or
you can click ‘OK’ to finish with quick setup. You’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband router, this
requires about 30 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.