Instruction Manual

dropdown list, then click << button.
Please note that only active (connected to LAN
port of this broadband router and switched on)
computer’s MAC address will be listed here. If
you think some computer’s MAC address
doesn’t appear, you can select ‘Refresh’ and
this broadband router will rescan for all
computers on LAN again.
Weekdays
Select weekdays which will be affect by this
parental control rule.
Time Start /
Time Stop
Select starting / ending time this parental
control rule will take effect.
Add
Add this parental control rule to the list.
Reset
Clear all inputted texts.
When one or more parental control rule is appear in the list, you can select it/them by
selecting its ‘Select’ box (under ‘Select’), and click ‘Delete’ button to remove it/them from
the list. Click ‘Delete All’ to remove all parental control rules. You can also click ‘Reset’ to
unselect all selected parental control rules. When you finished with the settings in this page,
you can click ‘Apply’ button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband router, this
requires about 30 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.